Introduction; Safety Precautions - Advantech UNO-2484G User Manual

1.1

Introduction

The UNO-2484G is an embedded hardware-ready platform capable of shortening
development time. The system offers a wide range of networking interfaces to satisfy
the various needs of different applications. Equipped with the latest Intel® Core™ i
processor, 8 GB of DDR4 RAM, four GbE LAN, and four USB 3.0 ports, the UNO-
2484G supports one DP and one HDMI display as well as Advantech's iDoor mod-
ules.
The UNO-2484G can tolerate a wide operating temperature range (-20 ~ 60 °C) and
features one mini PCIe (or three additional mPCIe ports via a mini-card extender) for
convenient expansion. This allows the UNO-2484G to be integrated with Wi-Fi, 3G,
and I/O expansion modules and industrial protocols via iDoor technology.
With support for multiple drivers and operating systems, including Windows 7, Win-
dows 10, and Linux, users can easily integrate applications on application-ready plat-
forms in order to offer versatile functions for diverse requirements.
1.2

Safety Precautions

The following sections provide instructions for setting up each connection. In most
cases, users will simply need to connect a standard cable.
Warning! Always disconnect the power cord from the chassis before manual han-
dling. Do not make any configuration changes when the power is on.
The sudden rush of power can damage sensitive electronic compo-
nents. Only experienced electronics personnel should open the chassis.
Warning! Toujours à la terre pour éliminer toute charge d'électricité statique avant
toucher UNO-2484G. Appareils électroniques modernes sont très sensi-
bles à charges d'électricité statique. Utilisez un bracelet antistatique à
tout moment. Placez tous composants électroniques sur une surface
antistatique ou dans un statique-sac blindé.
Caution! Always ground yourself to remove any static electric charge before
touching UNO-2484G. Modern electronic devices are very sensitive to
static electric charges. Use a grounding wrist strap at all times. Place all
electronic components on a static-dissipative surface or in a static-
shielded bag.
Caution! Toujours débrancher le cordon d'alimentation de votre boîtier lorsque
vous êtes travailler. Ne branchez pas lorsque l'appareil est allumé. Un
afflux soudain de puissance peut endommager les composants électro-
niques sensibles. Seulement connu personnel de l'électronique
devraient ouvrir le châssis.
UNO-2484G User Manual 2