Battery Life Calculations; Analog Configuration - Banner SureCross DX80 Gateway Network Manual

SureCross Wireless I/O Network Manual

Battery Life Calculations

Analog Configuration

The battery life calculations, in years, for some analog sensors are shown in the table below.
Table 1: Battery Life in Years
Manufacturer
1 Banner
2 Esterlink/KPSI
3 Turck
1 second 2 seconds
1 0.00 0.00
2 0.87 1.45
3 0.87 1.45
Note, battery life calculations are based on the sensor operating 24 hours a day, 365 days a year.
5.0
4.5
4.0
3.5
3.0
2.5
2.0
1.5
1.0
0.5
0.0
1 sec 2 sec
For each sensor characterized, a boost voltage and warmup time was specified. The sample and reports rates were varied to calculate
the estimated battery life. For example, a Banner QT50ULBQ6-75390 sensor set to a boost voltage of 15 volts, a warm-up time of 500
milliseconds, and a sample and report rate of 15 minutes, should have a battery life of 4.45 years.
All battery life calculations are approximations based on a strong radio signal. Weaker radio connections and missed packets will de-
crease the battery life.
rev. I
Device Model
U-Sonic/Distance QT50ULBQ6-75390
Submersible Level KPSI Series 700
Pressure PT100R-11-L13-H1131
Sample and Report Rates
4 seconds 16 seconds
0.00
2.15
2.15
4 sec 16 sec
Sample and Report Rates
www.bannerengineering.com - tel: 763-544-3164
Boost Voltage
64 seconds
0.26 0.91
3.32 3.89
3.32 3.89
PT100R-11-L13-H1131
KPSI Series 700
QT50ULBQ6-75390
64 sec
Warmup Time
15V 500 ms
10V 10 ms
10V 10 ms
5 minutes 15 minutes
2.61 4.45
4.25 4.25
4.25 4.25
5 min 15 min
75