Download Print this page

Banner SureCross DX80 GatewayPro Series Quick Start Manual

Hide thumbs Also See for SureCross DX80 GatewayPro Series:

Advertisement

Quick Links

SureCross DX80 GatewayPro
GatewayPro models for protocol conversion or web-based configuration
2.4 GHz
900 MHz
Models
Feature
DX80P9T6S
DX80P9T6W
Modbus/TCP or EtherNet/IP communication
protocol
DX80P2T6S
DX80P2T6W
DX80P9A6S
DX80P9A6W
Modbus/TCP protocol, Configuration capabil-
ity using the Web Configurator
DX80P2A6S
DX80P2A6W
WARNING: Not To Be Used for Personnel Protection
Never use this device as a sensing device for personnel protection. Doing so could lead to serious
injury or death. This device does not include the self-checking redundant circuitry necessary to allow its
use in personnel safety applications. A sensor failure or malfunction can cause either an energized or de-
energized sensor output condition.
The SureCross® DX80 Wireless Network
FlexPower Node
and Battery Supply Module
Gateway
Node
P/N 131933 Rev. F
The SureCross® wireless system is a radio frequency network with integrated I/O that can
operate in most environments and eliminate the need for wiring runs. Wireless networks are
formed around a Gateway, which acts as the wireless network master device, and one or
more Nodes.
• 10 to 30V dc power input
• Modbus serial interface and Ethernet interface
• Site Survey analyzes the network's signal strength and reliability and displays the results
on the Gateway's LCD
• Frequency Hopping Spread Spectrum (FHSS) technology and Time Division Multiple Ac-
cess (TDMA) control architecture ensure reliable data delivery within the unlicensed Indus-
trial, Scientific, and Medical (ISM) band
• Transceivers provide bidirectional communication between the Gateway and Node, includ-
ing fully acknowledged data transmission
For additional information, updated documentation, and accessories, refer to Banner Engi-
neering's website, www.bannerengineering.com/surecross.
The SureCross® DX80 wireless I/O network provides reliable moni-
toring without wiring or conduit installation. The SureCross wireless
network operates independently or in conjunction with a host system,
PLC, and/or PC software.
Each wireless network system consists of one Gateway and one or
Node
more Nodes. Devices ship with factory-defined discrete, analog, or a
mix of discrete and analog inputs and outputs.
The SureCross® DX80 network is a deterministic system—the net-
work identifies when the radio signal is lost and drives relevant out-
5/23/2013
Frequency
900 MHz ISM Band
2.4 GHz ISM Band
900 MHz ISM Band
2.4 GHz ISM Band
Antenna
External
Internal
External
Internal
External
Internal
External
Internal
0 131933
1

Advertisement

loading

Summary of Contents for Banner SureCross DX80 GatewayPro Series

  • Page 1 (TDMA) control architecture ensure reliable data delivery within the unlicensed Indus- trial, Scientific, and Medical (ISM) band • Transceivers provide bidirectional communication between the Gateway and Node, includ- ing fully acknowledged data transmission For additional information, updated documentation, and accessories, refer to Banner Engi- neering's website, www.bannerengineering.com/surecross. 900 MHz Models...
  • Page 2: Logging Into The Web Configurator

    • The factory default IP address for the devices is: 192.168.0.1. To change the device’s default IP address, first set up the host PC with an IP address different from the Ethernet Bridge, GatewayPro, or MultiHop Pro IP addresses. (Please refer to Banner document 133116 for instructions on setting up the host computer’s network IP ad-...
  • Page 3: Setting Up Your Wireless Network

    For additional information, including installation and setup, weatherproofing, device menu maps, troubleshooting, and a list of accesso- ries, refer to one of the following product manuals. • SureCross Quick Start Guide: Banner part number 128185 • SureCross Wireless I/O Network Manual: 132607 •...
  • Page 4 SureCross DX80 GatewayPro DIP Switch Settings Switches Device Settings Rotary dial address mode OFF* Extended address mode * Default configuration Address Mode The SureCross wireless devices may use one of two types of addressing modes: rotary dial addressing or extended addressing. In rotary dial address mode, the left rotary dial establishes the network ID and the right rotary dial sets the device ID.
  • Page 5: Modbus Register Table

    SureCross DX80 GatewayPro LED 1 LED 2 Gateway Status Device Error (flashing red) (flashing red) Modbus Communication Active (flashing yellow) Modbus Communication Error (flashing red) For Gateway and Ethernet Bridge systems, active Modbus communication refers to the communication between the Gateway and the Ethernet Bridge.
  • Page 6 SureCross DX80 GatewayPro Radio and General 900 MHz Compliance (150 mW Radios) Housing FCC ID TGUDX80 - This device complies with FCC Polycarbonate housing and rotary dial cover; polyester Part 15, Subpart C, 15.247 labels; EDPM rubber cover gasket; nitrile rubber, non- sulphur cured button covers IC: 7044A-DX8009 Weight: 0.26 kg (0.57 lbs)
  • Page 7: Ethernet Cables

    ER ARISING IN CONTRACT OR WARRANTY, STATUTE, TORT, STRICT LIABILITY, NEGLIGENCE, OR OTHERWISE. Banner Engineering Corp. reserves the right to change, modify or improve the design of the product without assuming any obligations or liabilities relating to any product previously manufactured by Banner Engineering Corp.