Wiring Diagrams; 5-Pin Euro-Style Hookup; 5-Pin Euro-Style Wiring (Nodes) - Banner SureCross DX80 Gateway Network Manual

SureCross Wireless I/O Network Manual

Wiring Diagrams

Use the following drawings to correctly wire power and I/O to the SureCross Wireless radio devices. For more information about wiring
sensors to the SureCross devices, refer to Sensor Connections.

5-pin Euro-Style Hookup

Wiring the 5-pin Euro-style connector depends on the model and power requirements of the device. Connecting dc power to the commu-
nication pins will cause permanent damage.
2
3 1
5
4

5-pin Euro-Style Wiring (Nodes)

Wiring the 5-pin Euro-style connector depends on the model and power requirements of the device.
2
3 1
5
4
Connecting dc power to the communication pins will cause permanent damage. For FlexPower devices, do not apply more than 5.5V to
the gray wire.
rev. I
1
2
3
4
Wire No.
1
2
3
4
5
Wire No. Wire Color 10 to 30V dc Powered Nodes
1 Brown 10 to 30V dc
2 White
3 Blue dc common (GND)
4 Black
5 Gray
www.bannerengineering.com - tel: 763-544-3164
Industrial ethernet port, female.
Housing. The rugged, industrial DX80 housing meets IEC IP67 stand-
ards.
Mounting hold, #10/M5 clearance. Mounting Holes accept metric M5
or UNC/UNF #10 hardware -- DIN rail mount adapter bracket availa-
ble.
5-Pin M12 Euro-style quick-disconnect serial port
Wire Color
Brown
White
Blue
Black
Gray
Description
10 to 30V dc
RS485 / D1 / B / +
dc common (GND)
RS485 / D0 / A / –
Comms Gnd
Battery Powered Nodes
dc common (GND)
3.6 to 5.5V dc
11