Monitoring Operating Status Using The Icim - Cisco Prisma II Installation And Operation Manual

Monitoring Operating Status Using the ICIM

Checking Operating Status
Using the ICIM, you can check the status of all operating parameters of the FHEAD
and RHEDA modules. All status information is displayed on the ICIM LCD.
Follow these steps to monitor operating parameters.
1.
At the MAIN menu, press the
2.
Press the
the
3.
Press the
Result: The Slot field is highlighted.
4.
Press the
5.
Press the
Result: The MODULE menu displays on the ICIM.
6.
Press the
7.
Press the
parameters until you find the parameter of interest.
8. Check the status of the desired parameter or select other parameters to
monitor. When finished, press the
Monitored Parameters
You can monitor the status of all operating parameters of the module. The tables
below describe the monitored parameters for the module.
FHEDA Monitored Parameters
FHEDA Parameter
RfIn
RfOut
IHybd1
IHybd2
ModTemp
78-4006323-01 Rev C
key to address the Shelf number. Then press the
SEL
key to scroll to the number of the desired shelf.
key.
ENTER
key or the

key.
ENTER
key.
STAT
key or the


Units
dBmV
dBmV
A
A
degC
Operation Using ICIM
key to highlight the Shelf and Slot fields.

key to scroll to the number of the desired slot.
key to scroll through the monitored
MAIN
key to return to the MAIN menu.
Actual RF input level
Actual RF output level
Hybrid Amplifier 1 current
Hybrid Amplifier 2 current
Module temperature
key or

Function
3-17