Checking Manufacturing Data Using The Icim - Cisco Prisma II Installation And Operation Manual

Forward and reverse headend driver amplifiers
Hide thumbs Also See for Prisma II:
Table of Contents

Advertisement

Checking Manufacturing Data Using the ICIM

Checking Manufacturing Data
The Manufacturing Data information listed later can be displayed on the ICIM
menu. To access the module's Manufacturing Data, follow these steps.
1.
From the MAIN menu, press the
fields.
2.
Press the
the
3.
Press the
Result: The Slot field is highlighted.
4.
Press the
5.
Press the
shown on the left below. Press the
manufacturing data menus, as shown on the right below.
6.
The
3-28
key to address the Shelf number. Then press the
SEL
keys to Scroll to the number of the desired shelf.
key.
ENTER
key or the
key. The MODULE menu for this module will be selected, as
ENTER
or
keys allow you to scroll through the manufacturing data.
Operation Using ICIM
key to highlight the Shelf and Slot
key to scroll to the number of the desired slot.
key to enter the start of the
key or
78-4006323-01 Rev C

Advertisement

Table of Contents
loading

Table of Contents