Cisco Prisma II Installation And Operation Manual page 72

SNMP Variables,
If a module is removed before the PNP data is read in the type, name and serial
number is blank.
Each row of this table is made up of the following variables:
p2RemoveModuleIndex
p2RemoveModuleChassisID
p2RemoveModuleSlotID
p2RemoveModuleName
p2RemoveModuleType
p2RemoveModuleSerialNum
Previous IP Address
This variable is named p2PreviousIP. When the IP of the ICIM is changed using the
front panel, this variable returns the previous ICIM IP address. It returns 0.0.0.0 until
the IP address of the ICIM is changed for the first time.
78-4006323-01 Rev C
Continued
Operation Using ICIM
The index for this table. The most recently removed
module is always in index position 1.
The chassis ID number of the removed module.
The slot ID number of the removed module.
The name of the removed module. This is the name
is from the PNP data for this module and matches
what the ICIM and SNMP display as the name.
TNCS and LCI may use a different name.
The TNCS type number of the removed module.
This number uniquely identifies every type of
module.
The serial number of the removed module. This
information is needed to determine if a module has
been replaced with one that is the same type.
3-39