Cisco Prisma II Installation And Operation Manual page 100
Forward and reverse headend driver amplifiers
Hide thumbs
Also See for Prisma II:
- Installation manual (180 pages) ,
- Installation and operation manual (146 pages) ,
- Technical bulletin (18 pages)
Table of Contents
Advertisement
Checking Module Alarms,
Checking Alarms
To check a parameter's alarm status, perform these steps.
1.
Right-click the module and click Details.
Result: The Module Details window displays. The alarms are shown under
Parameters and Alarms.
2.
If any of the parameters are in alarm, take the corrective action you deem
necessary.
4-28
Continued
Operation Using LCI
78-4006323-01 Rev C
Advertisement
Table of Contents
Troubleshooting
