Cisco Prisma II Installation And Operation Manual page 59

Checking Alarms Using the ICIM,
Setting Adjustable Alarm Thresholds
Follow these steps to change an adjustable alarm threshold from the factory default.
1.
At the MODULE menu, press the
Result: The STATUS menu displays on the ICIM.
2.
Press the
label n/a is displayed, you cannot configure that alarm threshold. Press the

3.
When the threshold that you wish to set is highlighted, press the
4.
Press the
5.
Press the
Note: Press Cancel (
6.
Press the
Result: Data Saved displays.
7.
When finished, press the
3-26
Continued
key. The alarm thresholds previously set are displayed. If the
SEL
key to highlight the next parameter's alarm threshold.
key or the


key or the

ALRM )key to return to the previous menu.
key to save the changes.
ENTER
MAIN
Operation Using ICIM
key.
STAT
key to change the increment size.
key to adjust the alarm threshold.
key to return to the MAIN menu.
key.
ENTER
78-4006323-01 Rev C