Overview - Cisco Prisma II Installation And Operation Manual

Overview

Introduction
The procedures in this chapter apply if you are using the Prisma II Intelligent
Communications Interface Module (ICIM) to configure and operate the Prisma II
FHEDA and RHEDA.
Scope of this Chapter
Included in this chapter are descriptions of the ICIM front panel and the ICIM LCD,
and detailed procedures on how to use the software menus to configure the module.
In This Chapter
This chapter contains the following topics.
ICIM Introduction
The ICIM Front Panel
The ICIM Password
Operating the ICIM
Monitoring Operating Status Using the ICIM
Configuring the Module Using the ICIM
Checking Alarms Using the ICIM
Checking Manufacturing Data Using the ICIM
Using the ICIM to Save the Configuration
SNMP Configuration Capability
Community Names
Setting SNMP Trap Receiver Parameters
SNMP Variables
78-4006323-01 Rev C
Chapter 3
Operation Using ICIM
Topic
Operation Using ICIM
See Page
3-2
3-3
3-6
3-13
3-17
3-19
3-22
3-28
3-31
3-32
3-36
3-37
3-38
3-1