System Requirements - Cisco Prisma II Installation And Operation Manual

System Requirements

Introduction
You will need the following computer software and hardware to run LCI.
Computer Requirements
Pentium II 300 MHz processor or equivalent
•
128 MB RAM
•
10 MB available hard drive space
•
1.44 MB floppy drive
•
CD-ROM Drive
•
Windows 95 or later operating system software
•
Connecting the PC to the Prisma II Chassis
The required cable is a standard "off the shelf" DB9 Female to DB9 Male serial
extension cable. The connectors are a serial 9-pin D-shell (EIA 574/232).
The Cisco part number for a six-foot DB9 Female to DB9 Male extension cable is
180143.
78-4006323-01 Rev C Operation Using LCI 4-3