Installing Lci - Cisco Prisma II Installation And Operation Manual

Installing LCI

Introduction
This section describes how to install your LCI software.
Installing the LCI Software
Follow these steps to install the LCI software.
1. Close all programs that are running on your computer.
2. Insert the LCI CD-ROM into your CD-ROM drive.
Results:
• The LCI software installation program starts automatically. If the
installation program does not start automatically, open Windows Explorer
and double-click the file setup.exe on the LCI CD-ROM.
The Welcome screen displays.
•
4-4 Operation Using LCI 78-4006323-01 Rev C