Cisco Prisma II Installation And Operation Manual page 82

LCI Module Tree Overview,
Module Information
Information about a module (its parameters, alarms, and status) is located in the
Module Details window. Within the module tree, you can access this window using
one of the following four methods:
• Double-click the chassis and select the module in the graphic that displays
• Right-click the chassis and select Open from the menu that displays
• Double-click the module
• Right-click the module and select Details from the menu that displays
Note: Although you can use the method that's most convenient for you, the
procedures throughout this chapter are described using the right-click module
technique.
For more information about each of these methods, refer to the next section,
Accessing the Module Details Window.
4-10
Continued
Operation Using LCI 78-4006323-01 Rev C