4
Quick Setup
This module enables you to quickly configure the CPE to deploy your wireless network.
O1 supports AP, Client, and
Router
modes.
4.1
AP Mode
4.1.1
Overview
AP mode is the default mode of the CPE. In this mode, this CPE is connected to the internet in wired manner, and
provides a WiFi network.
The CPE in AP mode can work with the CPE in Client or Universal Repeater mode. The following takes two CPEs
either working in AP mode or Client mode to illustrate.
CPE1: AP mode
SSID: Tenda_123456
Key: 12345678
4.1.2
Setting up the AP Mode
Configuration Procedure:
Step 1
Log in to the web UI of the CPE and choose Quick Setup to enter the configuration page.
Step 2
Select AP mode and click Next.
WISP
modes. O3 supports AP, Client,
Universal
Repeater, WISP, Repeater, P2MP, and
24
CPE2: Client mode