Wireless Status - Tenda O3 User Manual

5.2

Wireless Status

Log in to the web UI of the CPE, and choose Status. You can view wireless status here, including working mode,
SSID, security mode, and so on.
Parameters Description
Name
Working Mode
SSID
Security Mode
Channel/Radio Band
Wireless Client
AP's MAC Address
Signal Strength
Background Noise
TX/TR Link
Transmit/Receive Speed
Description
It specifies the working mode the device operates.
It specifies the wireless network name of this device.
It specifies the security mode of the wireless network of this device.
It specifies the channel and radio band used by this device to transmit radio signals.
It specifies the number of wireless clients connected to this device.
It displays "No Peer AP" if the device works in AP or Router mode. And in other modes, it displays
the MAC address of peer AP to which this device bridged.
It displays the signal strength of the first device connected to the wireless network of the device
when it works in AP or Router mode. It displays the received signal strength from peer AP when
the device works in Client, Universal Repeater, WISP, Repeater or P2MP mode.
It specifies the strength of radio interference signals in the ambient environment that interfere
with the channel of this device. Larger absolute value indicates less interference.
It specifies the number of spatial streams the device is transmitting or receiving.
It specifies the wireless transmitting/receiving rate.
In AP or Router mode: it displays the transmitting/receiving rate of the first device connected to
the wireless network of this device.
In Client, Universal Repeater, WISP, Repeater, or P2MP mode: it displays transmitting/receiving
rate of this device.
60