Tenda O3 User Manual page 144

Parameters Description
Name
Remote Web Management
IP Address
Port
Examples of Configuring Remote Web Management
Networking Requirement
The CPE is used in a company to deploy its network, and it works in Router mode.
Requirement: The administrator needs to maintenance the network when he is on business. So he needs to
access the device's web UI on WAN.
You are recommended to use the remote web management function to solve the problem.
Assumption:
The WAN IP address of the CPE is 202.105.106.55
−
The IP address of the computer which is allowed to access the device on WAN is 202.105.88.77
−
Port number is 8080
−
Configuration Procedure
Step 1 Log in to the web UI of the CPE.
Step 2 Choose Advanced > Network Service.
Step 3 Enable the Remote Web Management function.
Step 4 Set IP Address to Manual.
Step 5 Enter the IP address of the computer which is allowed to access the CPE on WAN, which is
202.105.106.55 in this example.
Step 6 Enter the port number, which is 8080 in this example.
Step 7 Click Save in the bottom of this page.
Description
It specifies whether to enable the remote web management function.
It specifies the IP address of a device which is allowed to access the web UI of the CPE.
All: It indicates that any computer in WAN can manage this device remotely. For security, it is not
recommended.
Manual: It indicates that only the device with specified IP address can manage this device
remotely. If this device belongs to a LAN, the gateway address (a public IP address) of the device
should be entered.
It specifies the port number used for remote management of device. Default: 8080. You can
change it if necessary.
Port s1 to 1024 have been used by well-known services. To avoid port conflict, you can set the
port number to one between 1025 and 65535. Then you can access the device from WAN by
visiting an address in the form of http://WAN IP address:port number. If the DDNS function is
enabled on the device, you can access the device by visiting an address in the form of
http://Domain name of WAN port:port number.
137