Tenda O3 User Manual page 40

Step 6 Click Save, and wait until the device reboots to activate the settings.
------End
You can check the SSID and key of CPE2 by choosing Wireless > Basic after logging in to the web UI.
Parameters Description
Name
Working Modes
Description
It specifies the working mode of the CPE.
AP mode: in this mode, the device creates a wireless network based on the current wired network.
Client mode: in this mode, the device works as a wireless adapter to connect to the wireless network of
upstream AP, and does not provide wireless access point.
Universal Repeater mode: in this mode, this device expands your WiFi network for broader network
coverage.
Advantage of Universal Repeater compared with Repeater mode: This mode does not require that the
upstream AP supports WDS function.
WISP mode: connect to an access point provided by ISP in wireless manner.
Repeater mode: the CPE connects 2 or more (this device supports 4 at most) wired networks with a
wireless link, and can be connected with both wired and wireless clients. To use the Repeater function
of this device, the peer AP is required to support WDS function, and use the same radio band as that of
this device.
P2MP mode: this device connects 2 or more (this device supports 4 at most) wired networks with a
33