Upstream Ap - Tenda O3 User Manual

Name
CCQ
Connection Duration
5.3.3

Upstream AP

This function is available only when the CPE works in Client, Universal Repeater, or WISP mode.
Parameters Description
Name
IP Address
MAC Address
Signal/Noise
Transmit/Receive
CCQ
Connection Duration
Description
It specifies the connection quality of the corresponding client. Higher percentage indicates better
connection quality.
It specifies the time that has elapsed since the wireless client is connected to the wireless
network of the CPE.
Description
It specifies the IP address of the upstream device.
It specifies the MAC address of the upstream device.
It specifies the WiFi signal strength and electromagnet interference signal strength of the
upstream device.
It specifies the transmitting and receiving rate of the upstream device.
It specifies the connection quality of the upstream device. Higher percentage indicates better
connection quality.
It specifies the time that has elapsed since this CPE bridges to the upstream device.
63