Examples Of Configuring Ddns - Tenda O3 User Manual

----End
Parameters Description
Name
DDNS
Service Provider
User Name
Password
Domain Name

Examples of Configuring DDNS

Networking Requirement
The CPE is used in a company to deploy its network, and it is set to Router mode. The WAN IP address of the CPE
is dynamic.
Requirement: The administrator on business can visit the resources on web server in LAN.
You are recommended to use the DDNS and port forwarding functions to solve the problem.
Assumption:
The information of the web server in LAN is shown as follows:
IP Address: 192.168.2.100
Service Port of the Web Server: 80
The registered domain name information is shown as follows:
Service Provider: Dyndns
Description
It Specifies whether to enable the DDNS function.
It specifies Dynamic Domain Name Service provider. The CPE supports Dyndns, No-ip.com, and
3322.org.
It specifies the user name used to log in to the dynamic DNS service, as well as the Login user name
you registered on the website of the service provider.
It specifies the password used to log in to the dynamic DNS service, as well as the Login password
you registered on the website of the service provider.
It specifies the domain name information obtained from the dynamic DNS server. You need to
enter the domain name which you registered on the website manually.
133