Traceroute; Speed Test - Tenda O3 User Manual

8.2.4

Traceroute

You can use the Traceroute tool to detect the routes that the packets pass by from the device to destination host.
Assume that you want to detect the routes that the packets pass by from the CPE to cn.bing.com.
Configuration Procedure
Step 1 Choose Advanced > Diagnose.
Step 2 Select Traceroute in the Diagnose list.
Step 3 Enter an IP address or a domain name, which is cn.bing.com in this example.
Step 4 Click Start.
----End
The diagnosis result will be displayed in a few seconds in the list below Start button. See the following figure:
8.2.5

Speed Test

It is used to test the throughput between two Tenda CPE in the same network. The test requires one of the two
devices to be set as a server and the other as a client. The client launches the test request to the server and the
server responds to it. The test result displays on the Speed Test page of the client.
Choose Advanced > Diagnose to enter the page.
Set Diagnose to Speed Test.
117