Tenda O3 User Manual page 66

Name
WLAN MAC Address
PoE LAN/LAN Speed
LAN IP Address
If the CPE is set to WISP or Router mode, the system status is shown as follows:
Parameters Description
Name
Connection Status
Connection Type
WAN IP Address
Default Gateway
Primary DNS Server
Secondary DNS Server
Description
It specifies the MAC address of the wireless network of this device.
It specifies the connection status of PoE LAN/WAN and LAN ports. It includes connection rate
and duplex mode.
It specifies the IP address (also named management IP address) of this device. By default, it is
192.168.2.1. You can access the web UI of this device using this IP address.
Description
It specifies the connection status of WAN port of this device in WISP or Router mode.
It specifies the internet connection type of this device in WISP or Router mode.
It specifies the IP address of WAN port of this device in WISP or Router mode.
It specifies the default gateway address of this device in WISP or Router mode.
It specifies the IP address of primary DNS server of this device in WISP or Router
mode.
It specifies the IP address of secondary DNS server of this device in WISP or
Router mode.
59