Table of Contents
Advertisement
----End
Verification
On the computer with the IP address of 202.105.106.55, start a browser and visit http://202.105.106.55:8080.
Then you can log in to the web UI of the CPE and configure the settings.
8.6.3
Reboot Schedule
Overview
This function enables the CPE to automatically reboot as scheduled. You can use this function to prevent wireless
performance degradation or network instability that occurs after a long CPE uptime.
Configuration Procedure
Step 1
Choose Advanced > Network Service.
Step 2
Enable the Reboot Schedule function.
Step 3
Specify a time at which the device reboots.
Step 4
Specify the dates on which the device reboots.
Step 5
Click Save on the bottom of this page.
----End
8.6.4
Login Timeout Interval
If you log in to the web UI of the CPE and perform no operation within the login timeout interval, the CPE logs
you out for network security. The default login timeout interval is 5 minutes.
Choose Advanced > Network Service to enter the page.
138
Hide quick links:
Advertisement
Table of Contents
