Button And Ports - Tenda O3 User Manual

LED Indicator
WiFi
LED1, LED2, LED3
(Signal Strength LED)

Button and Ports

① ②
.
O1
ID Port/Button
① DC
② Reset
Status Description
Solid on The wireless function is enabled, but no data is being transmitted.
Blinking Data is being transmitted in a wireless manner.
Off The wireless function is disabled.
Bridged successfully, and the device works in AP mode.
LED1, LED2 and LED3 are solid on: Perfect Signal
LED1 and LED2 are sold on, and LED3 is off: Good signal
Solid on
LED1 is solid on, and LED2 and LED3 are off: Weak signal. Please adjust the
direction or location of the two devices.
Blinking Bridged successfully, and the device works in Client mode.
Off The device does not bridge to another peer AP.
③
Description
Power Jack
Connect the included power adapter to this jack to supply power to the device.
Reset Button
After the device is powered on for 1 minute, hold down this button for about 7 seconds.
When all the LED indicators on the device light up, the device is restored factory settings.
O1
2
⑥
.
⑤
.
④