Application Scenario; Isp Hotspot Connection-Wisp Mode - Tenda O3 User Manual
Long range outdoor point to point cpe
Hide thumbs
Also See for O3:
- User manual (76 pages) ,
- User manual (198 pages) ,
- Quick installation manual (163 pages)
Table of Contents
Advertisement
2
Application Scenario
2.1
ISP Hotspot Connection-WISP Mode
An apartment needs to bridge an ISP hotspot for internet access.
2.1.1
Solution
Tenda CPE can address this requirement.
O3 is used as an example to illustrate the installation procedure. The installation procedure of O1 is similar.
2.1.2
Setting up the CPE
Step 1
Connect the computer to the CPE.
1.
Uncover the housing of the CPE.
2.
Use an Ethernet cable to connect the PoE/LAN/WAN port of the device to the PoE port of the PoE
injector.
3.
Use the included power adapter to connect the PoE injector to a power socket. The LAN/WAN LED
indicator of the CEP lights up.
4.
Use an Ethernet cable to connect your computer to the LAN port of the PoE injector.
Step 2
Set the CPE to WISP mode.
1.
Start a web browser on your computer, and visit 192.168.2.1. Enter your user name and password
(default: admin/admin), and click Login.
7
Hide quick links:
Advertisement
Table of Contents
