Table of Contents
Advertisement
8.1.3.1 Control Menu
Fill
This option fills the vessel up to the third (top) level sensor. Note, if the drain valve is open, it will
remain open during the filling process.
Rinse
Selecting this option will rinse the vessel by adding, draining and recirculating fluid throughout the
entire module system. During this process the drain valve knob will automatically open and close.
Do not attempt to stop this action manually. To stop the system from rinsing select Cancel.
PN B05577AC
The
Aqueous Liquid Module
series of manual controls accessed through software commands.
These controls offer flexibility when there is a need to operate the
system manually. To access these control commands:
and select the function you want to activate.
Control
Each function is explained in detail below.
Sample Modules
Aqueous Liquid Module
system can be operated through a
6
6-7
Advertisement
Table of Contents
Troubleshooting
