Sample Modules
Aqueous Liquid Module
Connecting the ALM
Recirculation Lines
The module is connected to the sample cell by two tubes ("lines"). Refer to
fluid from the module to the sample cell, line 2 returns the fluid to the module, making it a closed-
loop system.
Figure 6.5 Figure 4 Line Locations and Connections
Inlet and Drain Hoses
Two hoses are used to fill and drain the system. These hoses connect to the back of the instrument
(Figure
6.6). The inlet hose is also connected to a pressure regulator and gauge used to maintain the
appropriate water pressure (see specifications for the operating pressures).
6-4
Figure
6.5. Line 1 carries
PN B05577AC