4
To view the statistics for only part of the size distribution, add cursors around the desired
portion of the distribution and repeat steps
Compare to Standard
Compare to Standard enables you to compare a file against a standard. Standard files can be an
actual instrument control sample or a sample that is designated to be a standard control for other
similar samples.
Compute Sizes
Compute Sizes enables you to analyze raw data with an optical model or to reanalyze size data with
a different optical model than the one used when the sample was run. See also
an Optical
Model.
To select an optical model:
1
On the
Figure 5.5 Select Optical Model Dialog Box
2
Select the appropriate optical model. If the optical model is not in the list, click
more on optical models see
3
Click.
OK
with a different optical model than the one used when the sample was run. See also
APPENDIX C, Creating an Optical
PN B05577AC
menu, click
Analyze
Compute Sizes
APPENDIX C, Optical
. Use this function to analyze raw data with an optical model or to reanalyze size data
1
to 3.
. The Select Optical Model dialog box displays.
Models.
Model.
5
Data File Menus
Analyze Menu
APPENDIX C, Creating
. For
New Model
5-13