Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
the camp-on tone will not be heard.
DO NOT DISTURB (DND)
Description
A station can be programmed to activate Do-
Not-Disturb (DND). While in DND, the station
will not receive ring for CO lines, transferred
calls, intercom calls and will not receive paging
announcements. Only the attendant can call the
DND station by pressing '' or the last digit of the
station.
Operation
To activate DND from a keyset,
Press the [DND/FOR] button.
To deactivate DND from a keyset,
Press the [DND/FOR] button again.
Admin Programming
n
Do-Not-Disturb (PGM 111-BTN 3)
Condition
1.
Pressing the [DND/FOR] button during call
forward or preselected message, DND is not
activated and call forward or preselected
message is released.
2.
When a station, which is assigned to preset call
forward, is in DND, an incoming call is received
to the next station by ring assignment.
3.
Attendant can override a station which is in
DND by Camp-on or Intrusion. Also, it is not
permitted to be DND state in attendant.
4.
Attendant may cancel DND for a station or all
stations.
DND – ONE TIME DND
Description
A station assigned to DND can activate DND
not to be interrupted by other calls while on a
call for the duration of the off-hook period (One-
time), eliminating off-hook ring signals. When
activated, the phone will be in the DND mode
and calls to the keyset will follow normal DND
processing. When the station returns to an idle
state,
the
DND
deactivated.
Operation
To activate One-time DND from a keyset,
1. While off-hook state or connecting a CO line
or intercom call, press the [DND/FOR] button.
2. The station is in DND. (The LED of
[DND/FOR] button will light.)
3. When the station goes to idle state, DND is
released
in
[DND/FOR] button will be extinguished.)
Admin Programming
n
Do-Not-Disturb (PGM 111-BTN 3)
Condition
1.
This feature is not available in the ICM box.
2.
Attendant can override a station which is in
one-time DND state by Camp-on or Intrusion.
Also, it is not permitted to be one-time DND
state in attendant.
DID Call Wait
Description
When DID call is incoming to a station at talking
state, station can be recognize by the DID call
wait indication.
Operation
To activate DID call wait from a keyset,
1. Program the DID call wait button
[TRANS/PGM] + {FLEX} + 81
2. Press the DID call wait button and dial code 1
Admin Programming
n
DID Call Wait (PGM 114-BTN 17)
Condition
1.
This feature is only available in DKTU type
keyset.
2.
Station can be received the DID call wait
indication, only it is talking state.
3.
If station doesn't answer about the DID wait
call during DID/DISA no answer timer, the
call is following the setting of PGM 167.
2-6
Intercom Features
mode
is
automatically
the
station.
(The
LDK-
LED
of
via,
Advertisement
Table of Contents
