Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
activate Auto ring mode.
To
deactivate
automatic
Attendant Programming mode,
1. Press the [TRANS/PGM] button.
2. Dial 0 7 4.
3. Dial 0 and press the [HOLD/SAVE] button to
deactivate Auto ring mode.
4. The ring mode will be changed to the
previous ring mode.
Admin Programming
n
CO Line Ring Assignment (PGM 144)
n
External Control Contact (PGM 168)
n
Weekly Time Table (PGM 233)
Condition
1. Auto ring mode may be set by pressing the
[DND/FOR] button. In the Auto mode, ring
mode will follow Weekly Time Table (PGM
233).
2. The default value of Weekly Time Table is as
follows. The first table (00) is for main
attendant and others (01~15) are for ICM
tenancy group attendants.
Date
Day Start
Time
Mon
09:00
Tue
09:00
Wed
09:00
Thu
09:00
Fri
09:00
Sat
-- : --
Sun
-- : --
3. On-demand mode is not available in the Auto
ring mode.
4. The attendants of ICM tenancy group can
change ring mode as well as main attendant.
If an attendant of ICM tenancy group changes
ring mode, only the ring mode of ICM tenancy
group
is
changed.
changes the ring mode, all stations of the
system go to the changed ring mode.
5. When the ring mode is assigned to Auto
mode at main attendant, the ring mode of all
stations will follow the first Weekly Time Table
(00).
6. If the system ring mode is changed from non-
ring
mode
with
Night Start
Weekend
Time
Start Time
18:00
-- : --
18:00
-- : --
18:00
-- : --
18:00
-- : --
-- : --
18:00
-- : --
00:00
-- : --
00:00
But
main
attendant
day mode to day mode, the ring mode of all
ICM tenancy group will change to the
previous ring mode.
7. If external night ring is enabled and the
system is in night mode, the LBC 1 Contact
will follow the incoming UNA assigned CO
lines.
DSS/DLS CONSOLES
Description
Attendants and other keyset stations may be
equipped with DSS/DLS consoles which provide
additional buttons for more convenient operation.
The consoles are arranged as flexible mapped
units. The DSS/DLS consoles are assigned with
programming as one of the 3 maps. All buttons of
any map are programmable.
The DSS/DLS consoles each require a separate
line connection to the KSU, and take up a station
number,
Admin Programming
n
Station ID Assignment (PGM 110-BTN 1)
n
Associate Station of DSS/DLS Map (PGM
110-BTN 2)
Condition
1.
There is no limit to the number of DSS/DLS
consoles in a system.
2.
The default value for DSS/DLS is as follows;
MAP 1
Flex BTN 1 – Intrusion
Flex BTN 2 – All Call Page
Flex BTN 3 – Call Park 01
Flex BTN 4 – Station Group 1
Flex BTN 5 – Camp-on
Flex BTN 6 – Int All Call Page
Flex BTN 7 – Call Park 02
Flex BTN 8 – Station Group 2
Flex BTN 9 – Group Call Pick-up
Flex BTN 10 – Ext All Call Page
Flex BTN 11 – Call Park 03
Flex BTN 12 – Station Group 3
Station 100-135
MAP 2
Station 136-139
MAP 3
CO Line 01-12
INTERCOM BOX MUSIC SELECT
4-4
LDK-
Attendant Features
Advertisement
Table of Contents
