Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
1. CO LINE FEATURES
AUTO CALL NUMBER REDIAL
Description
A user can direct the system to continually redial
a number which returned busy or when no
answer was obtained. The system will retry the
number based on programming with appropriate
pauses in between dialing. (default: 3 times)
Operation
To use ACNR while receiving busy/no answer on
a CO line,
1. Press the [REDIAL] button.
2. Replace the handset or go on-hook.
3. The system will automatically retry the call at
programmed intervals.
4. When the called party answers, lift handset
or press [MUTE] button to make the call.
To cancel,
Press the flashing [REDIAL] button.
Or,
Lift handset or press [MUTE] button while a CO
line is seized to make ACNR.
Admin Programming
n ACNR Pause Timer (PGM 180-BTN 10)
n
ACNR Delay Timer (PGM 180-BTN 8)
n
ACNR Tone Detect Timer (PGM 180-BTN 13)
– applicable to analog CO line only
n
ACNR No Answer Timer (PGM 180-BTN 9)
n
ACNR Retry Counter (PGM 180-BTN 11)
n
ACNR Tone Cadence (PGM 423)
Condition
1. A keyset which doesn't have [REDIAL]
button,
should
[REDIAL] Flexible Button to use ACNR.
[TRANS/PGM] + Flex. BTN + [TRANS/PGM] +
9 7 + [HOLD/SAVE]
2. The analog CO lines in the system should be
equipped with Call Progress Tone detection
Units (CPTU).
be
programmed
with
3. When predefined CO line is busy in ACNR
mode, an available CO line in the same
group will be seized.
AUTOMATIC PAUSE INSERTION
Description
The system will automatically insert a timed pause
in a speed dial or redial number, if a flash or PABX
access code is included in the number.
Admin Programming
n
Pause Timer (PGM 181-BTN 11)
CALL PARK
Description
A user can park a call in a parking location and
retrieve the call by dialing the location number.
Also, the user may make a page announcement
for the desired user to pick-up the call. If the call
remains unanswered for the Call Park Recall time,
the station which parking the call receives recall.
If the call is still unanswered, the attendant will
also receive recall. If unanswered in the Attendant
Recall time, the CO line call will be disconnected
and returned to idle.
Operation
To park a call while on a CO line call,
1. Press the [TRANS/PGM] button.
2. Dial the parking location (601-608).
3. Replace the handset or go on-hook
4. If desired, page the party to retrieve the call.
To retrieve the parked call from a keyset,
a
1. Lift the Handset or press the [MON] button.
2. Dial the parking location.
Admin Programming
n
I-Call Park Recall Timer (PGM 180-BTN 2)
1-1
LDK-
CO Line Features
Advertisement
Table of Contents
