Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
another paging is not allowed.
5.
Page warning tone may be controlled by
Admin. Programming.
6.
When the page timer is expired, paging
connection is automatically released and ICM
busy tone is presented to the paging station.
7.
You should lift the handset to make a page.
When trying to make a page without lifting
handset, "LIFT HANDSET TO PAGE" is
displayed on the LCD.
8.
Paging can be programmed to a Flex. button.
9.
If an intercom call is received while paging,
the caller will hear intercom busy tone.
10. If a CO line call is received while paging, the
station will receive off-hook ring.
PAGING - MEET ME PAGE
Description
A user can respond to a page from any station
and connect to the paging party for a private
conversation. The user should respond to the
page in the Page Time-out duration to connect
the paging party.
Operation
To respond a Meet-me Page,
1. Lift the handset or press the [MON] button.
2. Dial Meet-me Page code 5 4 4 or press the
[HOLD/SAVE] button.
3. The call with paging party is established and
the zone returns to idle.
Admin Programming
n
Paging Timeout Timer (PGM 181-BTN 10)
Condition
1.
To assign {MEET-ME PAGE} at a flexible
button,
[TRANS/PGM] + Flex. BTN + 5 4 4 +
[HOLD/SAVE]
2.
A station may respond meet me page
regardless of assignment of pick-up/paging
group assignment/page access.
3.
Page from CO line can't be answered by
pressing the [HOLD/SAVE] button or the
code of meet-me answer. If a user tries to
answer a meet me page request from CO
line, error tone is heard and LCD message
for error will be displayed.
PAGING - CONFERENCE GROUP
Description
It is possible for the second originator to page
with the first originator during the paging
announcement. It is possible for any paged
station user to be the second page originator by
off-hook and pressing the [CONF] button. At that
time there is another second page originator,
then the previous second originator goes to idle
status and the new second originator can make
paging with the first originator.
Admin Programming
n
Paging Warning Tone (PGM 161-BTN 4)
n
Paging Access (PGM 111-BTN 8)
n
Conference Page Zone (PGM 119)
Condition
1. Page
Timer
Conference Group.
2. If there is the second page originator, it is
impossible to "Meet Me Page".
3. If the first originator goes on-hook, the
conference
group
released.
4. The second originator can make paging
regardless of page access privilege.
PICK UP – DIRECTED CALL PICK UP
Description
A station can pick up a call ringing other station
within accessible intercom tenancy group by
pressing the pick up code. Tone ringing
intercom calls, incoming CO lines, recalling CO
lines and transferred CO lines can be answered
by a station instead of the ringing station.
Operation
To answer a call ringing at another station,
1. Lift the handset or press the [MON] button.
2. Dial Direct Call Pick up code 7.
3. Dial the intercom number of the ringing station.
Admin Programming
2-12
Intercom Features
is
not
applied
to
paging
connection
LDK-
Paging
is
Advertisement
Table of Contents
