Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
Message 09: AT HOME
Message 10: AT BRANCH OFFICE
Operation
It is the same with the operation of Custom
Messages.
Condition
1. If a station assigns call forward while
preselected
message
preseleted message is canceled automatically.
2. User can leave a message in keyset and SLT.
When leave a message in SLT, DND warning
tone will be heard to notify it as soon as the
handset is lifted.
3. When a preselected message is selected in a
keyset, the [DND/FOR] button will be flashing.
LEAST COST ROUTING (LCR)
Description
LCR is a system programmable feature that is
automatically
selected
available route when an outgoing CO call is
made.
This
programming
necessity for the user to dial the access code of
the least expensive carrier. There are three types
of operation to activate LCR;
Internal LCR - It can be activated during internal
dial tone. If the dialed digits are matched with
internal LCR code, the system will seize a CO
line from the programmed CO group and send
the
modified
digits
programming.
Loop LCR - It can be activated by dialing the
first accessible CO group code ('9' or '0') or by
pressing Loop button. If the dialed digits are
matched with COL LCR code, the system will
seize a CO line from the programmed CO group
and send the modified digits according to LCR
programming.
Direct CO LCR - It can be activated during CO
dial tone. After dialing CO line or CO group code,
or pressing CO line or CO group button, it can be
activated. If the dialed digits are matched with
COL LCR code, the system will seize a CO line
from the programmed CO group and send the
is
activated,
the
the
least
expensive
eliminates
the
according
to
LCR
modified digits according to LCR programming.
Operation
Internal LCR
1. Dial internal LCR code after lifting handset or
pressing the [MON] button. On-hook dialing
can also activate LCR call.
2. It is an internal LCR code if the code is
programmed with INT or BOTH in Leading
Digit Table.
Loop LCR
1.
Dial COL LCR code after dialing the first
accessible CO line or CO group access code
('0' or '9') or press the Loop button.
2.
It is a COL LCR code if the code is
programmed with COL or BOTH in Leading
Digit Table.
Direct CO LCR
1.
Dial COL LCR code after dialing CO or CO
group access code or pressing CO or CO
group button.
2.
It is a COL LCR code if the code is
programmed with COL or BOTH in Leading
Digit Table.
Admin Programming
n
LCR (PGM 220)
n
LCR – LDT Table (PGM 221)
n
LCR – DMT Table (PGM 222)
n
LCR Table Initialization (PGM 223)
Condition
1. There are 6 LCR modes. The mode is
determined by PGM 220-BTN 1.
- LCR Access Mode 00 (M00): LCR call is
disabled.
- LCR Access Mode 01 (M01): Only Loop LCR
is activated.
- LCR Access Mode 02 (M02): Internal LCR
and Loop LCR are activated.
- LCR Access Mode 11 (M11): Loop LCR and
CO LCR are activated.
- LCR Access Mode 12 (M12): All types of LCR
are activated. (When dialing '9' or pressing
Loop key, the system will wait next digits to
compare LCR table without seizing CO line.)
- LCR Access Mode 13 (M13): All types of LCR
3-16
LDK-
System Features
Advertisement
Table of Contents
