Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
Admin Programming
n
Network Date/Time Setting (PGM 161-BTN
1)
n
System Time Setting (PGM 178-BTN 1)
n
System Date Setting (PGM 178-BTN 2)
Condition
1. When the correct date and time is saved by
pressing
the
confirmation tone is heard and the station
goes to idle status automatically.
2. To use "Network Clock Set" feature, ISDN
CO line should be equipped in the system.
3. The date and time from network is only in the
CONNECT message. If "Network Clock Set"
is activated, the date and time change is
occurred with received ISDN CONNECT
message.
4. The system and network clock set can be
accessed by Admin programming.
5. In some countries, network doesn't send
Date/Time data in ISDN CONNECT message.
In these cases, Network Clock Set doesn't
work.
ATTENDANT DISABLE OUTGOING
ACCESS
Description
This feature allows attendant to disable CO lines
from outgoing. Incoming call is not affected.
Operation
To place a CO line in/out -of-service from the
attendant,
1. Press the [TRANS/PGM] button.
2. Dial 0 7 3.
3. Press
the
desired
Confirmation tone is heard every time when
the status for the selected line is changed.
4. Press the [MON] button to return to idle.
Condition
1.
Any attendant can use this feature.
2.
The LED of CO line out of service is flashing
in attendant and lighting in other stations.
[HOLD/SAVE]
button,
CO
line
button.
3.
To release, press the flashing {CO LINE}
button in Attendant station.
4.
If the desired CO line is busy, the attendant
can still make the CO line out of service. The
feature will take effect when the CO line goes
to idle.
5.
When activating this feature, multiple CO
lines may be in/out of service without
redialing the feature code. Confirmation tone
will be heard after each CO line is in/out of
service.
ATTENDANT FORWARD
Description
The
attendant
Forward) a call to the other station and the
forwarded station can be activated as the
attendant temporarily for forwarded period. The
forwarding attendant station cannot activate as
attendant and activate as normal stations for the
call forwarding time.
Operation
It is the same procedure as the Unconditional
Call Forward.
Condition
1.
If the attendant assigns unconditional call
forward to SLT or WHTU, the forwarded
station
only
attendant call, attendant recall and others.
The
forwarded
activate attendant features.
ATTENDANT INTRUSION
Description
The attendant can intrude upon a station
conversing with a CO line. And the attendant can
converse with the station and the CO line.
Operation
To intrude on a call from the attendant station
4-2
Attendant Features
can
forward
(Unconditional
serve
incoming
calls
SLT
or
WHTU
LDK-
as
cannot
Advertisement
Table of Contents
