Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
The connected line or calling line number may be
restricted. If CLIR is set to ON, calling party
number will not be sent to the called party when
an ISDN CO line call is made. If COLR is set to
ON, the called party number will not be sent to
the calling party when an ISDN CO line call is
received and answered.
Admin Programming
n
CLIR (PGM 114-BTN 14)
n
COLR (PGM 114-BTN 15)
ISDN-KEYPAD FACILITY SERVICE
Description
The system enables users to send Keypad
Facility IE (Information Element) instead of called
party IE for sending information on ISDN
interface to the network when pressing the
programmed button as {Keypad Facility}. Some
specific features to be supported by network can
be operated by dialing each code at the station.
Operation
1.
When pressing the programmed {Keypad
Facility} button after seizing a CO line
(ISDN), the system will send the dialed
digits as Keypad Facility IE instead of Called
Party
Number
message to the network.
When the user releases the CO line (ISDN), or
pressing the programmed {Keypad Facility}
button during dialing digits, Keypad Facility IE
Sending will be stopped automatically.
Admin Programming
n
Keypad Facility Access (PGM 114-BTN 6)
Condition
1. To assign {Keypad Facility} flexible button,
[TRANS/PGM] + Flex. BTN + [TRANS/PGM]
+ 8 9 + [HOLD/SAVE]
2.
The Keypad Facility Access Authority (PGM
IE
in
INFORMATION
114-BTN 6) should be ON to use this feature.
3.
This feature can be activated by pressing
the {Keypad Facility} button after seizing a
CO line (ISDN).
4.
When this feature is activated, the system
starts to send Keypad Facility IE instead of
Called Party Number IE regardless of
CONNECT message from the network
unless pressing {Keypad Facility} button to
deactivate it. So the system will continue to
send Keypad Facility IE instead of DTMF
tone even after CONNECT message is
received from the network.
5.
If the Speed Dial is stored with [FLASH] as
the first digit for ISDN line and the station
has the Keypad Facility Access authority, the
digits after [FLASH] command will be sent
as Keypad Facility and the feature will be
deactivated after sending all digits.
6.
When any of the following features are
encountered after the Keypad Facility is
activated, the feature will be deactivated
automatically;
- Pressing function keys as [REDIAL],
[TRANS/PGM], [FLASH], [HOLD/SAVE],
[CONF]
- Pressing CO keys as CO, CO Group,
Loop
- Pressing Flex. Buttons assigned some
features as {SPEED}, {DSS}, {Call Park},
{Keypad Facility}
- Making On-hook
- When DISCONNECT message is received
from the network
7.
This feature may not be operated depending
on the services that require to handle two
call references at the same time after B
channel connection is made as Hold &
Retrieving, Conference, etc.
8.
The Speed Dial Numbers started with
[FLASH] (display "D") send saved digits as
Keypad Facility IE instead of Called Party
Number IE. After sending all Speed Dial
Numbers,
this
automatically.
9.
When the system receives a Called Party
Number IE during sending Keypad Facility
IE, the system will stop sending the Keypad
Facility IE.
1-11
LDK-
CO Line Features
feature
is
deactivated
Advertisement
Table of Contents
