Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
CO LINE ACCESS
Description
Stations are permitted to access to outgoing CO
lines
based
on
CO
programming. Keysets may use flexible buttons
assigned to access a CO line or a CO line Group
(Pool Flexible button) and loop flexible buttons. If
allowed, stations without individual CO line
button can access individual CO lines using dial
codes.
Operation
To access a CO line from a keyset,
1. Lift the Handset or press the [MON] button.
2. Press the desired CO line, Pool, or Loop
button.
3. Or, dial the individual CO line access code,
CO group access code, or the first CO line
access code from the accessible group.
To access a CO line from a SLT,
1. Lift the handset.
2. Dial the individual CO line, CO group access
code, or the first CO line access code from
the accessible group.
Admin Programming
n
CO Line Choice (PGM 160-BTN 3)
n Inter-digit Timer (PGM 181-BTN 8)
n CO Line Group Access (PGM 117)
n CO Line Group (PGM 141-BTN 1)
st
n Override 1
CO Line Group (PGM 161-BTN
3)
Condition
1.
A keyset should have an idle appearance
(CO line/Pool button/Loop button) to access
an outgoing CO line/incoming CO line.
2.
To assign the {LOOP} button,
[TRANS/PGM] + a Flex. BTN + [TRANS/PGM] +
8 4 + [HOLD/SAVE]
3. When the Override 1
enabled, the system will search for the next
accessible CO group until a CO line is
Line
Group
Access
st
CO line Group is
available if there is no available CO line by
dialing CO line group access code ('9' or '0').
4. A station which is not permitted to access a
CO line will hear error while trying to access
a CO line, but the station can receive a
transferred CO line call.
5. The CO line choice (Round-robin or Last
Choice)
is
Programming (PGM 160-BTN 3)
6. If the CO line is BRI, when a user tries to
seize B1 but the network requests to serve
B2, the system can change CO line to B2.
(There is a {B2 CO} button or {LOOP}
button.)
CO LINE GROUPS
Description
The system provides grouping of similar types of
CO lines. The groups are used for common
access by stations assigned to access the
groups. CO lines are selected from the group
based on the assigned method, round robin or
the last line, in order to minimize call collision
(glare).
Operation
The number of CO line group in each system is
in LDK -24 system. You can access a CO line
group by dialing 8 8 and the CO group number.
The first CO l i ne group in each system (00) is
directed line group (it can be used with CO
button) and the last CO line group is unassigned
line group.
Admin Programming
n
CO Line Group (PGM 141-BTN 1)
n
CO Line Choice (PGM 160-BTN 3)
Condition
1. Unused CO lines should be assigned to
unused CO group(9) to prevent to be
accessed by a station.
2. The first CO line group (00) is directed line
group and it can be used with {CO line}
1-4
CO Line Features
determined
by
Admin
LDK-
8
Advertisement
Table of Contents
