Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
and rerouted to another station with CCR when
attendant does not answer the call until No
Answer Timer expires or attendant is busy.
Operation
To operate Auto Attendant,
1. When an incoming call is received at
attendant,
2. The call is not answered until No Answer
Timer expires by attendant or attendant is
busy.
3. The call is forwarded to Auto attendant. The
caller will hear VMIB message and can
reroute the other user with CCR.
Admin Programming
n
Auto Attendant VMIB Announce # (PGM 165)
Condition
1. It is for no answered incoming call and not
available for recall and transferred call.
VOICE OVER
Description
This feature provides voice announcements to a
busy station without interrupting the existing
conversation. The announcement is received over
the existing conversation so that only the busy
station hears both incoming parties. The user can
talk back to other party and alternate conversation
between the parties.
Operation
To alternate between parties from receiving
keyset,
Press the [HOLD/SAVE] button.
Admin Programming
n
Voice Over (PGM 113-BTN 6)
Condition
1. The holding party may receive MOH if
provided.
WAKE-UP
Description
A station or attendant can register a "wake-up"
or alarm time. When the time is reached, the
system will signal the station with an audible and
visual signal.
Operation
To register a wake-up time from the attendant
station,
1. Press the [TRANS/PGM] button.
2. Dial 0 4 2.
3. Dial the station range to be alerted, if a single
station is to receive alarm, enter ' ' instead of
the second station.
4. Dial 2-digit hour and minute for alerting (24-
hour mode).
5. Dial ' # ' for wake-up alarm until canceled, if
not it is canceled automatically after the first
wake-up alarm ringing.
6. Press the [HOLD/SAVE] button.
To cancel a wake-up alarm from the attendant,
1. Press the [TRANS/PGM] button.
2. Dial 0 4 3.
3. Dial the station range to be alerted, if a single
station is to receive alarm, enter ' ' instead of
the second station.
4. Press the [HOLD/SAVE] button.
To register wake-up time from a station,
1. Press the [TRANS/PGM] button.
2. Dial 4 1.
3. Dial 2-digit hour and minute to for alerting.
4. Dial ' # ' for wake-up alarm until canceled, if
not it is canceled automatically after the first
wake-up alarm ringing.
5. Press the [HOLD/SAVE] button.
To cancel a wake-up time from a station,
1. Press the [TRANS/PGM] button.
2. Dial 4 2.
3. Press the [HOLD/SAVE] button.
Admin Programming
n
Wake-up Fail Ring Timer (PGM 182-BTN 7)
3-35
LDK-
System Features
Advertisement
Table of Contents
