Table of Contents
Advertisement
Programming Manual for Digital Key Telephone System
300 & LDK-100
4.
If station has many DID wait call, then the
last incoming DID wait call is indicated.
5.
DID wait call is required an associated CO
button.
FLASH ON ICM CALL
Description
This feature enables station users to utilize the
[FLASH] button to terminate pages and intercom
calls. While paging or intercom call pressing the
[FLASH] button will terminate the call and return
intercom dial tone.
HEADSET COMPATIBILITY
Description
An industry standard headset can be connected
to a keyset instead of handset. The station is
programmed for headset operation in place of
speakerphone operation.
A user can use headset instead o f handset to
make or answer a call.
Operation
To
change
the
Speakerphone or Headset,
1. Press the [TRANS/PGM] button.
2. Dial code 7 5.
3. The Station Answer mode is displayed on the
LCD.
4. Dial code 1 (Speaker mode) or 2 (Headset
mode).
To change the Headset Ring mode,
1. Press the [TRANS/PGM] button.
2. Dial code 7 6.
3. The Station Answer mode is displayed on the
LCD.
4. Dial code 1 (Speaker ring only), code 2
(Headset only) or 3 (Both).
Admin Programming
n
Headset Ring Mode (PGM 111-BTN 10)
n
Speakerphone/Headset (PGM 111-BTN 11)
Condition
station
mode
between
1. The intercom signaling mode (HF/TN/PV)
can be set in headset mode keyset as the
Speakerphone mode keyset.
2. In Headset mode, user can select an
incoming ring mode to hear ring with speaker,
headset or both by Admin programming.
3. The station will receive paging with speaker
of the keyset.
4. To answer an intercom call in Tone mode,
user should press the [MON] button.
5. When an intercom call is received in Privacy
mode,
the
station
automatically. User should press the [MUTE]
button to answer the intercom call.
HOT LINE/WARM LINE
Description
A station can be programmed to perform a pre-
assigned function when the station goes to an
off-hook state. The function can be activated
immediately upon an off-hook state(Hot Line) or
after a delay, if no other action is taken within a
predefined time (Warm Line).
The following items are can be assigned as Hot
Line/Warm Line function;
n
Assigned function at a Flex. Button
n
CO line or CO Group access
n
Intercom call to a predefined station
Operation
To activate Hot Line,
1. Lift the handset at a station, which is
assigned to Hot Line.
2. The assigned hot line feature is activated
immediately.
To activate Warm Line,
1. Lift the handset at a station, which is
assigned to Warm Line.
2. If no dialing for assigned warm line timer, the
assigned warm line feature is activated.
Admin Programming
n
Warm Line Timer (PGM 182-BTN 8)
n
Warm Line (PGM 113-BTN 7)
2-7
LDK-
Intercom Features
will
be
mute
state
Advertisement
Table of Contents
