Winmate IK70 User Manual page 69

BIOS Setting Description
Graphics Turbo Graphics Turbo
IMON Current IMON Current
values supported
Primary Display Select Primary
Display
Select PCIE Card Select the card
used on a platform
Internal Graphics Internal Graphics
settings
Aperture Size Select the aperture
size
DVMT Select DVMT
Pre-Allocated Pre-Allocated
DVMT Total Gfx Select DVMT Total
Mem Gfx Mem
Gfx Low Power Select Gfx Low
Mode Power Mode
Setting Option Effect
14-31 Select Graphics Turbo IMON Current
values supported
Auto Select which of IGFX/PEG/ PCI
IGFX Graphics device should be primary
PEG display or select SG for Switchable Gfx
PCI
Auto Skip GPIO based Power Enable to
dGPU
Elk Greek 4 DGPU Power Enable=ActiveLow
PEG Eval DGPU Power Enable=ActiveHigh
Auto Keep IGFX enabled based on the setup
Enabled options
Disabled
128MB Select the aperture size
256MB Note: Above 4MB MMIO BIOS
512MB assignment is automatically enabled
1024MB when selecting 2048MB aperture. To
2048 MB use this feature please disable CSM
port
0M~60M Select DVMT 5.0 Pre-Allocated (Fixed)
Graphic Memory size used by Internal
Graphic Device
256M Select DVMT 5.0 Total Graphic Memory
128M size used by the Internal Graphic
MAX Device
Enabled/ This option is applicable for SFF only
Disabled
Chapter 4: Insyde H20 BIOS Setup 69