Video Process Amplifier - FOR-A FA-10PS Operation Manuals

4-2-6. Video Process Amplifier

The Video Process Amplifier page allows you to set Process Amp settings for each FS
separately.
Item Default Setting range
FS FS1
FS Link -
Item Default
Video Level 100.0%
Luminance Level 100.0%
Chroma Level 100.0%
Setup/Black Level
Hue
Unity (button)
Chroma Level and Hue settings are ineffective if Correction Mode is set to Sepia (see sec. 4-2-7. "Color
Corrector").
With 4K Mode enabled (see Section 4-2. "Video Block"), all 4 FS settings under the same FS group (FS3-6
or FS7-10) are linked.
The following two parameter items are shared settings for all Video Process Amplifier,
Color Corrector and Video Clip pages. FS Link cannot be applied.
Item Default
Operate /
Operate
By-pass *1
Split Off
With 4K Mode enabled (see Section 4-2. "Video Block"), all 4 FS settings under the same FS group
*1
(FS3-6 or FS7-10) are linked.
Allows you to select an FS for which to set Process Amp
FS1-10
settings.
Allows FS settings to be simultaneously adjusted.
Designate a base FS from those selected under FS Link >
FS1-10
FS. All other FS settings are adjusted in the same
increments as those of the base FS.
Setting range (Steps)
0.0 - 200.0% (0.1%)
0.0 - 200.0% (0.1%)
0.0 - 200.0% (0.1%)
0.0% -20.0 - 100.0% (0.1%) Allows you to adjust the black level.
-179.8° - 180.0° (0.2°) Allows you to adjust the Chroma
0.0°
- -
Setting range
Operate Setting to By-pass skips the video process and
By-pass disables the parameter settings.
Allows you to select a split display mode for
comparing images before and after correction.
Off: Displays the image after correction.
Off
Mode1: Splits the screen vertically and displays
Mode1 - 3
Mode2: Splits the screen horizontally and
Mode3: Displays the image before correction.
31
Description
Description
Allows you to adjust the video level.
Allows you to adjust the luminance
level.
Allows you to adjust the chrominance
level.
phase.
Allows you to reset all settings in this
page to default.
Description
images before and after correction.
displays images before and after correction.