FOR-A FA-10PS Operation Manuals page 34

In Link mode, the amount adjusted for the FS selected under FS will be applied to
other FSs. The resulting setting values of Linked FSs may differ. If the adjusted value
exceeds the upper/lower limit, the resulting setting value will be clipped at the limit. If
the FS selected under FS is not selected under FS Link, Link mode settings are
ineffective.See Section 4-2-6-1. "Link Mode Setting Example" for further information
on Link mode settings.
 White Level settings
Item
RED, GREEN, BLUE
GROUP ADJUST
(Group Adjustment)
Unity (button)
With 4K Mode enabled (see Section 4-2. "Video Block"), all 4 FS settings under the same FS group (FS3-6
or FS7-10) are linked.
 Black Level Settings
Item
RED, GREEN, BLUE
GROUP ADJUST
(Group Adjustment)
Unity (button)
With 4K Mode enabled (see Section 4-2. "Video Block"), all 4 FS settings under the same FS group (FS3-6
or FS7-10) are linked.
 Gamma Level Settings
Item
Gamma Curve
RED, GREEN, BLUE
GROUP ADJUST
(Group Adjustment)
Unity (button)
With 4K Mode enabled (see Section 4-2. "Video Block"), all 4 FS settings under the same FS group (FS3-6
or FS7-10) are linked.
IMPORTANT
Setting range
Default
(Steps)
0.0 - 200.0%
100.0%
(0.5%)
OFF
OFF
ON
- -
Setting range
Default
(Steps)
0.0 - 200.0%
100.0%
(0.5%)
OFF
OFF
ON
- -
Setting range
Default
(Steps)
Black
Center Center
White
0.0 - 200%
100.0%
(0.5%)
OFF
OFF
ON
- -
34
Description
Allows you to adjust the white level of R,
G, and B components separately.
Allows you to adjust the white level of R,
G, and B components all together while
retaining the proportion of the separately
adjusted levels.
Allows you to reset the settings to default.
Description
Allows you to adjust the black level of R,
G, and B components separately.
Allows you to adjust the black level of R,
G, and B components all together while
retaining the proportion of the separately
adjusted levels.
Allows you to reset the settings to default.
Description
Allows you to select a gamma curve type.
Allows you to adjust the gamma level of
R, G, and B components separately.
Allows you to adjust the gamma level of
R, G, and B components all together
while retaining the proportion of the
separately adjusted levels.
Allows you to reset the settings to default.