FOR-A FA-10PS Operation Manuals page 3

Frame synchronizer
Hide thumbs Also See for FA-10PS:
Table of Contents

Advertisement

Precautions
Important Safety Warnings
[Power]
Operate unit only at the specified supply voltage.
Caution
Disconnect the power cord via the power plug only. Do not pull on the cable portion.
Do not place or drop heavy or sharp-edged objects on the power cord. A damaged
cord can cause fire or electrical shock hazards. Regularly check the power cord for
excessive wear or damage to avoid possible fire / electrical hazards.
Stop
Ensure the power cord is firmly plugged into the AC outlet.
Caution
[Grounding]
Ensure the unit is properly grounded at all times to prevent electrical shock.
Caution
Do not ground the unit to gas lines, units, or fixtures of an explosive or dangerous
nature.
Hazard
[Operation]
Do not operate the unit under hazardous or potentially explosive atmospheric
conditions. Doing so could result in fire, explosion, or other hazardous results.
Hazard
Do not allow liquids, metal pieces, or other foreign materials to enter the unit. Doing
so could result in fire, other hazards, or a unit malfunction.
Hazard
If a foreign material does enter the unit, turn the power off and immediately
disconnect the power cord. Remove the material and contact an authorized service
representative if damage has occurred.
[Transportation]
Handle with care to avoid impact shock during transit, which may cause
malfunction. When you need to transport the unit, use the original or suitable
alternative packing material.
Caution
3

Advertisement

Table of Contents
loading

Table of Contents