Table of Contents
Advertisement
③ C White Clip Level
Setting range 50 - 111% (Default: 111%)
50%
SMPTE 100% color bar when color 700mVp-p.
RGB CLIP
To adjust the RGB clipping, select the RGB
CLIP under CLIP MODE, and then set RGB
White Clip and RGB Black Clip.
Once the "RGB CLIP" is selected, the
YPbPr input video signal is converted into
an RGB signal in the unit. The converted
RGB signal is processed so as not to
exceed the RGB gamut range set under the
RGB White Clip and RGB Black Clip
parameters in the menu.
Then
the
processed
converted again to YPbPr format. This
correction is used to eliminate out-of RGB
gamut problems.
300%
100%
50%
RGB
signal
is
0%
-200%
38
50%
111% (default)
100%
RGB Clip Processing
White
setting
range
Black
setting
range
Advertisement
Table of Contents
