FOR-A FA-10PS Operation Manuals page 27

<Adjustable range per signal format>
Format
1080/59i
720/59p
1080/59p Level-A
1080/50i
720/50p
1080/50p Level-A
1080/23.98PsF
1080/24PsF
1080/59p Level-B
1080/50p Level-B
2x1080/59i Level-B
2x1080/50i Level-B
2x1080/29p Level-B
2x1080/25p Level-B
1080/59p Level-A→B
1080/50p Level-A→B
1080/59p Level-B→A
1080/50p Level-B→A
525/60
625/50
Note that 1080/59p or 1080/50p Level-B output signal that is converted from Level-A
requires more delay than other output signal formats. In such casem, 3H delay is
present in Line or AVDL Sync Mode, and 2H+400clk or 2H+850clk in Line(Minimum)
Sync mode.
 Notes on configuring the Line (AVDL) / Line (Minimum) sync system (in case of
1080 /59i)
To synchronize video signals, adjust System Phase settings so that input signal timings fall in
allowable input timings, which differ depending on the Sync Mode setting and video signal
format as described below.
The difference between the FA-1010 input and output timings must be -1.5H to -0.5H, if
Sync Mode is set to Line. The difference must be -6H to -0.5H, if set to AVDL.
-6H
Allowable input
timing in AVDL
mode
Allowable input
timing in Line
mode
Allowable input
timing in Line
minimum mode
Line AVDL
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-3H to -1H -11H to -1H
-3H to -1H -11H to -1H
-3H to -1H -11H to -1H
-3H to -1H -11H to -1H
-3H to -1H -11H to -1H
-3H to -1H -11H to -1H
-3.5H to -2.5H -8H to -2.5H
-3.5H to -2.5H -8H to -2.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
-1.5H to -0.5H -6H to -0.5H
IMPORTANT
-5H -4H
27
Adjustable range
Line(Minimum)
-1.2 H to -0.2 H (400 clk)
-1.25 H to -0.25 H (400 clk)
-1.2 H to -0.2 H (400 clk)
-1.15 H to -0.15 H (400 clk)
-1.2 H to -0.2 H (400 clk)
-1.15 H to -0.15 H (400 clk)
-1.15 H to -0.15 H (400 clk)
-1.15 H to -0.15 H (400 clk)
-1.2 H to -0.2 H (400 clk)
-1.15 H to -0.15 H (400 clk)
-1.2 H to -0.2 H (400 clk)
-1.15 H to -0.15 H (400 clk)
-1.2 H to -0.2 H (400 clk)
-1.15 H to -0.15 H (400 clk)
-3.2 H to -2.2 H (-2H - 400 clk)
-3.32 H to -2.32 H (-2H - 850 clk)
-1.2 H to -0.2 H (400 clk)
-1.15 H to -0.15 H (400 clk)
-1.4 H to -0.4 H (700 clk)
-1.4 H to -0.4 H (700 clk)
-3H -2H -1H 0H
FA-1010
output
timing