FOR-A FA-10PS Operation Manuals page 37

 RGB Clip
Item
White
(RGB White Clip)
Black
(RGB Black Clip)
Unity (button)
With 4K Mode enabled (see Section 4-2. "Video Block"), all 4 FS settings under the same FS group (FS3-6
or FS7-10) are linked.
The following two parameter items are shared settings for all Video Process Amplifier,
Color Corrector and Video Clip pages. FS Link cannot be applied.
Item Default
Operate /
Operate
*1
By-pass
Split Off
With 4K Mode enabled (see Section 4-2. "Video Block"), all 4 FS settings under the same FS group
*1
(FS3-6 or FS7-10) are linked.
 Video Clip Setting Ranges
Y Signal Settings
① Y White Clip Level
Setting range 50 - 109% (Default: 109%)
50%
SMPTE 100% color bar when 100% white.
② Y Black Clip Level
Setting range -7.5 - 50% (Default: -7.5%)
50%
Setting range
Default
(Steps)
50 - 300%
300.0%
(0.5%)
-200 - 50%
-200.0%
(0.5%)
- -
Setting range
Operate Setting to By-pass skips the video process and
By-pass disables the parameter settings.
Allows you to select a split display mode for
comparing images before and after correction.
Off: Displays the image after correction.
Off
Mode1: Splits the screen vertically and displays
Mode1 - 3
Mode2: Splits the screen horizontally and
Mode3: Displays the image before correction.
100%
0%
0%
SMPTE 100% color bar when 100% black.
37
Description
Sets the upper threshold of RGB color
space.
Sets the lower threshold of RGB color
space.
Allows you to reset the settings to default.
Description
images before and after correction.
displays images before and after correction.
109%
Y white clip level setting range
50%
100%
50%
Y Black clip level setting range
-7.5%