Using The Ir Remote Control - Blizzard Lighting LB HEX Unplugged User Manual

Using the IR Remote Control

The IR-3 remote control will allow you to transition through dozens of color and brightness
combinations, access automated color jump and fade programs, add variable speed white
strobe effects, and access sound active mode with mic
sensitivity adjustments.
First, in the fixture(s) control panel menu, navigate to
IR--, and set it to "on" (IRon).
*Before operating the remote, be sure to remove the
plastic tab in the battery compartment. Then, point
the remote control directly towards the fixture (the
sensor is on the front face), and note the best perfor-
mance distance is within 5-meters (16.4 ft).
Button Configuration:
Up Down
Red Green
Amber LT. Green
Orange Mint
Almond Aqua
Yellow Cyan
<UP>
Used to increase the value of the current setting.
<DOWN>
Used to decrease the value of the current setting.
<OFF>
1.) Turns the LEDs off.
2.) When off, the <UP/DOWN> buttons will change the DMX channel (d001-d512).
<ON>
1.) Turns the LEDs on.
2.) When on, the <UP/DOWN> buttons will:
a.) Static colors = increase/decrease brightness
b.) Strobe = increase/decrease speed
c.) Jump = increase/decrease speed
d.) Fade = increase/decrease speed
e.) Sound = increase/decrease microphone sensitivity level
<STROBE>
Press for white strobe effects. Use the <UP/DOWN> buttons to adjust the speed.
<JUMP>
Press for auto color jump effects. Use the <UP/DOWN> buttons to adjust the speed.
<FADE>
Press for auto color fade effects. Use the <UP/DOWN> buttons to adjust the speed.
<SOUND>
Press for sound active mode. Use the <UP/DOWN> buttons to adjust the mic sensitivity.
LB Hex™ Unplugged Manual Rev. A
Off On
Blue White
LT. Blue Strobe
UV Jump
Purple Fade
Magenta Sound
Page 14
© 2018 Blizzard Lighting, LLC