Table of Contents
Advertisement
DATALOGIC
2.3
OPENING THE DEVICE
Before installing the DS41 it may be necessary to open the scanner to select
the interface required.
The scanner must be disconnected from the power
supply during this operation.
Refer to the following instructions and diagram below when opening the
reader:
•
Unscrew the four screws as shown below to open the scanner for
access to the output interface jumper.
•
Carefully remove the cover of the scanner. Avoid any contact with the
mirrored rotor, the lenses, or other optical components.
WARNING
Figure 2.2 - Opening the DS41
DS41
Installation - 2.3
Advertisement
Table of Contents
