Table of Contents
Advertisement
DS41
1.2
DESCRIPTION
Some of the main features of this scanner are given below:
• very high scanning speed (800 scans/sec).
• raster versions available.
• completely configurable from host computer.
• 2 serial communication interfaces; one can be set as RS232, RS485, or
20 mA C.L., and the other is an RS232 auxiliary interface.
• reads all popular codes.
• supply voltage from 10 to 30 Vdc.
• test mode to verify the reading features and exact positioning of the
scanner without the need for external tools.
• configurable in different operating modes to suit the most various barcode
reading system requirements.
• code verifier
• possibility to detect the absolute position of the label in the scan line (for
DSP models only, see paragraph 1.3).
• PCS verification (for DSP models only, see paragraph 1.3).
The DS41 scanner uses a solid state laser diode as a light source; the light
emitted has a wavelength between 630 and 680 nm. Refer to the section
"Safety Precautions" at the beginning of this manual for information on laser
safety.
The use of a semiconductor laser has made it possible to develop an
extremely compact scanner with low power consumption. The reader is
contained in a rugged aluminum housing; the mechanical dimensions are
101 x 83.5 x 42 mm and it weighs about 800 g.
The protection class of the enclosure is IP65, therefore the reader is
particularly suitable for industrial environments where high protection against
harsh external conditions is required.
1.2 - General features
DATALOGIC
Advertisement
Table of Contents
