Table of Contents
Advertisement
DATALOGIC
JBOX is designed to be mounted to a panel of metal, plastic or other
appropriate material using the mounting screws provided in the package. To
do this:
1) Open the junction box by unscrewing the 4 cover screws.
If necessary, using the two mounting holes inside the junction box as a
pattern, mark the panel with an appropriate object and then drill two small
pilot holes in the panel.
2) Align the junction box and insert the two self-threading screws with their
washers and screw them into the panel until tight (see Figure 2.7).
Figure 2.7 - Mounting JBOX
DS41
Installation - 2.7
Advertisement
Table of Contents
