DS41
DATALOGIC
2.6
JBOX INSTALLATION
JBOX provides a passive connection between your scanner and the outside
world in a fast and practical way. It represents an alternative to the 25-pin
connector models. Figure 2.5 shows the basic layout of DS41 using the
junction box.
Junction Box
Scanner
cable
DS41
System cables
Figure 2.5 - Scanner using JBOX
For JBOX connections, the scanner has a cable that terminates in a 24-pin
connector that plugs into the junction box. The system cables pass through 6
glands in the side of the JBOX and the individual wires connect to spring
clamp terminal blocks inside which provide access to all scanner signals.
2.6.1
Mounting JBOX
The diagram below shows the dimensions of the junction box and its relative
mounting holes.
mm
in
Figure 2.6 - JBOX dimensions
2.6 - Installation