Table of Contents
Advertisement
DATALOGIC
DS41
1 GENERAL FEATURES
1.1
INTRODUCTION
The DS41 scanner is a barcode reader complete with decoder, available in
16 standard models. These were designed to satisfy the most demanding
requirements associated with high performance scanning.
Standard Application Program
A Standard Application Program is factory-loaded onto the DS41. This
program controls barcode reading, serial port interfacing, data formatting and
many other operating and control parameters.
It is completely user configurable from a host computer using the WINHOST
interface utility program provided on diskette with the scanner or using the
Host Mode programming procedure, by ESC sequences via the serial
interface.
There are four different programmable operating modes to suit various
barcode reading system requirements. Included in these is a test mode to
verify the reading features and exact positioning of the scanner without using
external tools.
C Programmability
The DS41 belongs to the generation of Datalogic scanners that operate
under the 'C' programming environment which is a recognized industry
standard.
If your requirements are not met by the Standard Application Program,
Custom Application Programs can be developed by your local Datalogic
distributor.
General features - 1.1
Advertisement
Table of Contents
